Hot Water Alberti Maxijet 110/11, 200/15, 200/20

Alberti Maxijet – Industrial duty hot cleaners

Alberti Maxijet Hot water cleaners are fitted with UDOR heavy duty low RPM crankshaft driven pumps and 4 pole (1450 rpm) electric motors.

They are fitted with a number of safety devices including a safety flow switch (in the event the water supply fails), low voltage circuitry and delayed total shut-down (TS).

The Tough ABS covers (same material as a Ute deck liner) takes the knocks and is easy to keep clean.

Bumper protection bars are fitted as standard to protect the water inlet & outlet fittings and make a useful tie down point for transportation.

Alberti Maxijet 110/11 TS

Output: Maximum 110 Bar (1600 psi), 11 L/min.
Motor: 2.2 Kw (3.0 Hp) 230 volt 50 hz, 1440 rpm
Temperature: Hot water to 100 °C
Hose: 12 meters 3/8″id  wire braided high pressure hose with cpuplers
Gun: Vega swivel gun + LD9  S/S Twin lance & wash jets

Alberti Maxijet 200/15 TS

Output:               Maximum  200 Bar (3000 psi), 15 L/min.

Motor:                 5.5 Kw (7.5 Hp) 400 volt 50 hz, 1440 rpm

Temperature:      Hot water to 100 degree C.

Hose:                   12 meters 3/8″id  wire braided high pressure hose with couplers

Gun:                     Vega swivel gun + LD9  S/S Twin lance & wash jets

Alberti Maxijet 200/20 TS

Output:               Maximum 200 Bar (3000 psi), 20 L/min.

Motor:                 7.5 Kw (10 Hp) 400 volt 50 hz, 1440 rpm with double bearings

Temperature:      Hot water to 90 degree C.

Hose:                   12 meters 3/8″id  wire braided high pressure hose with copuplers

Gun:                     Vega swivel gun + LD9  S/S Twin lance & wash jets

Hour meter:       Fitted as standard equipment.

Huge volume heavy duty industrial 3 phase hot cleaner suitable for continuous operation. For fleet and heavy equipment cleaning, larger factories, container depots etc.

 

Optional Accessories (all models):  Extension hose, Wall mounted Hose reels, Various nozzles, Anti scale kit, Steam kit.

 

A note on Steam: 

Many brands of Hot cleaners are fitted with a thermostat which reads 150 degrees on the dial, but this doesn’t necessarily mean that the unit will produce steam.  Usually a steam kit needs to be fitted.  A steam kit reduces the volume of water flowing through the boiler coil, so the remaining water stays in the coil longer and becomes hotter and hotter.  The result is a mixture of hot water and steam vapour. If you require true steam for sterilization or special processes then see our Alberti Medivap Steamer.

Price on requestNZ$ (+GST)